von Hans – Willi Herrmann
Soll einer nicht sagen, dass wir nicht umgehend auf Wünsche reagieren.
Soeben erreicht mich eine Mail mit folgender Bitte:
“Ich bin heute beim Herumstöbern in der Praxis meines Chefs auf ein ATR Technika Vision – Gerät gestossen, was ungenutzt in der Ecke steht.
Wäre es Ihnen möglich, mir die Einstellungsmöglichkeiten, mit denen Sie in der Ghassan Yared – Technik arbeiten, zukommen zu lassen oder als Artikel auf Wurzelspitze zu veröffentlichen?
Tun wir doch gerne. Bei der GYT handelt es sich um eine besondere Antriebsart von Nickel -Titan – Instrumenten zur Wurzelkanalaufbereitung. die sowohl die Gefahr des Instrumentenbruchs reduzieren soll, als auch im Rahmen einer einfachen Anwendungstechnik mit wenigen Instrumenten auskommen soll.
Nachfolgend die Programmieranleitung, die Drew Moncarz, im Frühjahr 2008 bei ROOTS ins Netz gestellt hat. Er schreibt: .
” I graduated from endo at the University of Toronto in 2004. Ghassan Yared was one of my professors. I’ve been using an ATR Tecnika for his reciprocating technique. The early results are very impressive.
I recently bought two ATR Vision motors. It took some effort, but I got the programming sequence to make the Vision reciprocate. The programming/storage cards aren’t necessary. Ghassan is happy to have me share this with you.
Here is the sequence to get the motor to reciprocate:
1. Find a preset that you would never use. I used “large canal prep” “PF Or. Shaper #6/5”. I’ll never get confused because I don’t use Profiles.
2. Decrease the torque to 5.
3. Press the “redct.” button to change the reduction to 1:1.
4. Press the “ctrl” button (the check mark) and the “torque” increase buttons at the same time. “Forward Reverse” will appear on the screen.
5. Press the “redct.” button to change the reduction back to 16:1.
6. Press the “rpm” up button to increase the RPM to 400.
7. Press the “ctrl” button (the check mark) and the music note button directly above it at the same time.
8. Use the “Program” down button to decrease the “trs. fwd” to 0.4.
9. Use the “torque” down button to decrease the “trs. rev” to 0.2.
10. Use the “rpm” down button to decrease the “del. inv” to 25.
11. Hit the “System” up button to save the settings.
Soweit die Programmieranleitung.
Ich bin gespannt auf die ersten Eindrücke und Erfahrungen.
Kommentare sind ja seit Neuestem möglich !
Vielen, vielen Dank! Feedback folgt in Kürze!
Viele Grüsse
Christian
hi, i have a question regarding the torque how much shuold it be , i mean high or low torque
and how I can sit the torque?
thank you
If you can set the torque values on your motor with reciproc, choose the highest possible torque.